Multi Functional Coil Wrapping Machine With PLC And HMI Control System
Coil Wrapping Machine Introduction
Coil Wrapping Machine for vertical winding and bundling, such as tube coils, hose rolls, etc. After coiling and bundling, the tube coils are well shaped. The machine saves labor and increases productivity, plays a key role in your production process and is very popular in the modern packaging industry.
Coil Wrapping Machine specifications
The standard configuration is listed below. For other configurations, please contact our sales representative.
The machine should be installed on a flat, hard floor with a load of more than 1 ton / square meter.
Basic features of Coil Wrapping Machine
- Adjustable take-up arm based on ID and width
- PLC and HMI control system for automatic operation.
- Two working modes: automatic and manual.
- Tension control for pipe feed for tight winding.
- The parameters can be set in the PLC program.
- Calculate the length of the pipe and automatically cut the pipe.
- Automatic winding system.
- Automatic alarm system when a fault occurs.
- The position of the pipe is automatically detected by the sensor.
- The speed can be adjusted by the frequency converter.
- Pipe feeders are used with automatic displacers.
- Winding the pipe coil in an orderly manner.
Coil Wrapping Machine Technical data:
| Name | Coil Wrapping Machine |
| Tube coil inner diameter | 500-1200mm |
| Tube coil outer diameter | 900-1600mm |
| Tube coil width | 200-400mm |
| Tube coil weight | 3-50kg |
| Coil feed mode | Hold coil type |
| Counter | 30-100meters |
| Winding speed | maximum. 100m/min |
| Strap position | 3 belt |
| Packaging material | PP:
Width:10-16mm Thickness:20-40micron |
| Power supply voltage | AC 380V, 50HZ, 3-phase 5-wire |
Product Tags:
|
|
Multi Functional Coil Wrapping Machine With PLC And HMI Control System Images
|
